HPA branded products carry a one year warranty against manufacturer's defects on all major, non-consumable, components. Damaged caused by incorrect installation, wear and tear, abuse, misuse, racing, collision, foreign particles, etc., will NOT be covered by warranty.
Warranty is offered to original purchaser only and is not transferable.
HPA Motorsports will not be liable for incidental, consequential, indirect, special, or punitive damages of any kind. HPA’s entire liability shall be limited to replacement or repair of the damaged parts at HPA’s option.
Labour and freight costs associated with warranty repair or replacement are NOT covered.
To maintain validity of warranty, factory recommended maintenance schedule and manufacturer’s Technical Service Bulletins (TSB’s) must be adhered to and documented.
In addition to the above, the HPA FT/FTX series Turbo packages for VR6 motors have the following conditions:
Components covered by warranty include:
- Turbochargers
- Exhaust Manifold
- Downpipe
- Catalysts
- Exhaust System
- Intake Manifold
- Silicone Plumbing
- Intercoolers
- Fuel Pump
- Fuel Injectors
- Brake Calipers
- Haldex Controller
Components NOT covered by warranty include:
- Clutch
- Gearbox
- Brake Pads & Brake Rotors
Any claims of defect in workmanship must be repaired at HPA Motorsports' facility located in Langley, Canada. Should the damage be determined to be a direct result of the workmanship of HPA Motorsports, labor costs for HPA Motorsports to complete repairs at our own facility will be included in the warranty repair. In certain circumstances, at the sole discretion of HPA Motorsports, permission may be granted for repairs to be completed at an HPA authorized facility at a pre-approved labor rate.
HPA Motorsports will not be liable for incidental, consequential, indirect, special, or punitive damages of any kind. HPA’s entire liability shall be limited to replacement or repair of the damaged parts at HPA’s option.
To maintain validity of warranty, in addition to the factory recommended maintenance schedule, the following services must be adhered to and documented according to the prescribed schedule:
| Break In period: engine speed is not to exceed 5500 RPM, and absolutely NO standing starts are to be performed | 1000 km / 620 miles |
| Mass Air Flow meter – Clean | 5000 km / 3100 miles |
| Mass Air Flow meter – Replace | 20,000 km / 12,500 miles |
| Engine Oil (Motul Xcess / 8100 5w40) & Filter – Replace | 5000 km / 3100 miles |
| Haldex Fluid & Filter – Replace | 10,000 km / 6000 miles |
Any claims of defect in workmanship must be repaired at HPA Motorsports' facility located in Langley, BC Canada. Should the damage be determined to be a direct result of the workmanship of HPA Motorsports, labor costs for HPA Motorsports to complete repairs at our own facility will be included in the warranty repair.
For remote customers, in certain circumstances, at the sole discretion of HPA Motorsports, permission may be granted for repairs to be completed at an HPA authorized facility at a pre-approved labor rate.
Should you experience any issues with your items, please contact HPA Motorsports for technical assistance using the form below or by calling 604-888-7274 prior to engaging in any repair procedure. Failure to follow the advice of our technical support staff may cause undue harm that will not be covered by warranty.
VAD15 Gen2
A revolutionary 52mm Can-Bus OLED Display for universal applications.
Performance Monitor
High speed Can-bus integration gives you access to up to 33 fixed sensors that you can display in real time. Use the rotary control dial to swap sensors on the fly, set min and max warning values, and enable or disable warning popups.
1.5" OLED Display
Perfect blacks and bright contrast delivers the best readability, even in direct sunlight.
Configurable Views
Configure eight pages with up to six sensors per page. Choose from a variety of styles: numerical, analogue, line graph, bar graph, to display your data the way you want it.
Wifi Configuration
Wifi Configuration
Connect to the VAD15 using your smartphone's wifi to configure your device and access additional features such as logging and firmware updates.
Integrated Shift Light
Configure the integrated single LED shift light with 8 specific RPM settings and the colours of your choice.
Alerts & Warnings
Set warning levels and alerts for any sensor using min and max thresholds.
Expandable Functionality
6 analogue inputs allow you to connect 0-5V sensors of your choice such as: oil pressure, fuel pressure, EGT, Ethanol and boost pressure.
Universal Fitment
Universal Fitment
VAD15's compact design is easily integrated into your interior and can be paired with any 52mm aftermarket gauge pod.
