HPA branded products carry a one year warranty against manufacturer's defects on all major, non-consumable, components. Damaged caused by incorrect installation, wear and tear, abuse, misuse, racing, collision, foreign particles, etc., will NOT be covered by warranty.
Warranty is offered to original purchaser only and is not transferable.
HPA Motorsports will not be liable for incidental, consequential, indirect, special, or punitive damages of any kind. HPA’s entire liability shall be limited to replacement or repair of the damaged parts at HPA’s option.
Labour and freight costs associated with warranty repair or replacement are NOT covered.
To maintain validity of warranty, factory recommended maintenance schedule and manufacturer’s Technical Service Bulletins (TSB’s) must be adhered to and documented.
In addition to the above, the HPA FT/FTX series Turbo packages for VR6 motors have the following conditions:
Components covered by warranty include:
- Turbochargers
- Exhaust Manifold
- Downpipe
- Catalysts
- Exhaust System
- Intake Manifold
- Silicone Plumbing
- Intercoolers
- Fuel Pump
- Fuel Injectors
- Brake Calipers
- Haldex Controller
Components NOT covered by warranty include:
- Clutch
- Gearbox
- Brake Pads & Brake Rotors
Any claims of defect in workmanship must be repaired at HPA Motorsports' facility located in Langley, Canada. Should the damage be determined to be a direct result of the workmanship of HPA Motorsports, labor costs for HPA Motorsports to complete repairs at our own facility will be included in the warranty repair. In certain circumstances, at the sole discretion of HPA Motorsports, permission may be granted for repairs to be completed at an HPA authorized facility at a pre-approved labor rate.
HPA Motorsports will not be liable for incidental, consequential, indirect, special, or punitive damages of any kind. HPA’s entire liability shall be limited to replacement or repair of the damaged parts at HPA’s option.
To maintain validity of warranty, in addition to the factory recommended maintenance schedule, the following services must be adhered to and documented according to the prescribed schedule:
| Break In period: engine speed is not to exceed 5500 RPM, and absolutely NO standing starts are to be performed | 1000 km / 620 miles |
| Mass Air Flow meter – Clean | 5000 km / 3100 miles |
| Mass Air Flow meter – Replace | 20,000 km / 12,500 miles |
| Engine Oil (Motul Xcess / 8100 5w40) & Filter – Replace | 5000 km / 3100 miles |
| Haldex Fluid & Filter – Replace | 10,000 km / 6000 miles |
Any claims of defect in workmanship must be repaired at HPA Motorsports' facility located in Langley, BC Canada. Should the damage be determined to be a direct result of the workmanship of HPA Motorsports, labor costs for HPA Motorsports to complete repairs at our own facility will be included in the warranty repair.
For remote customers, in certain circumstances, at the sole discretion of HPA Motorsports, permission may be granted for repairs to be completed at an HPA authorized facility at a pre-approved labor rate.
Should you experience any issues with your items, please contact HPA Motorsports for technical assistance using the form below or by calling 604-888-7274 prior to engaging in any repair procedure. Failure to follow the advice of our technical support staff may cause undue harm that will not be covered by warranty.
Designed to be Reliable,
Engineered to Perform
Designed to be Reliable,
Engineered to Perform
Engineered to Perform
HPA OEM+ IS38 Turbo Upgrade
HPA is proud to offer an OEM+ IS38 Turbo that addresses all the reliability concerns plaguing the OE IHI IS38. This is a perfect service part for blown IS38 turbos, or a great upgrade for GTI owners looking to upgrade their IS20.
Unrivaled Reliability
We have a considerable number of upgrades made to the VAG OEM IS38 to address all reliability concerns and believe our product will be one of the most reliable options out there.
The HPA OEM+ IS38 Turbo features a fully upgraded and redesigned bearing system. This bearing system has been proven out in the field with 100% reliability on our 450 HP level Hybrid Turbos. We are providing the exact same package in an OEM+ design. This is insurance from the known weaknesses of the OEM IHI turbo.
PRECISION ENGINEERED
HPA has spent 4 years of research and development to completely rethink the bearing housing design.Each turbo requires precision CNC machining of the intake and exhaust housings and include an HPA proprietary mixed-flow turbine wheel, and CNC machined billet compressor wheel with better spool and anti-surge characteristics while still being compatible with all brands of IS38 tuning
OEM+ QUALITY
We found on some OEM turbos after long-term heat cycling from high EGTs to cold, the wastegate itself physically bends. Some of them have snapped and ended up in the catalytic convertor. This is a concern especially for customers who attend track days and drive their cars hard. We have upgraded all our wastegates with a highly heat resistant Inconel version to ensure this never happens.
DIRECT BOLT-ON REPLACEMENT
The HPA IS38 Hybrid turbo upgrade has everything you will need for a simple and quick installation including an HPA Turbo Muffler Delete, OEM diverter valve, OEM wastegate actuator, and OEM installation kit along with all hardware required. All turbos will ship from HPA with the wastegate actuator set to the exact voltage needed for true plug-and-play installation.
HPA OEM+ IS38 equipped GTI Delivers on the Ultimate Endurance Test!
HPA OEM+ IS38 equipped GTI Delivers on the Ultimate Endurance Test!
Jamie Orr, Max Everhard, and Pedro Ruta Jr. set out to go from the top of South America to “fin del mundo” in Argentina in the Rallywagen, a slammed 400HP Volkswagen MK7 GTI. This GTI packed with three guys, camera equipment and camping gear, traversed nine countries, eleven border crossings, eight thousand five-hundred miles!
"I probably can't put into words how much I absolutely beat on the turbo from the moment it was installed.. It was flawless, with 12,000+ miles on one oil change... We went Coast to Coast in the USA non-stop in sub-30 hours as the first drive with it basically. In South America there were days that we would literally drive at 50-75% throttle until the fuel tank was empty, stop to refuel without turning the engine off, and then do the same, over and over again. On one specific day I drove with questionable fuel from 500 ft to 15,500 ft, continuously going full throttle to pass tractor trailers, then stopping for photos, and repeating."
- Jamie Orr, VW Ambassador
