VEHICLE APPLICATION
| MAKE | MODEL | YEAR |
| Audi | A3 2.0T (8V) | 2015+ |
| Audi | S3 (8V) | 2015+ |
| Audi | TT 2.0T | 2014+ |
| Volkswagen | GTI (MK7 / MK7.5) | 2015+ |
| Volkswagen | Golf R (MK7 / MK7.5) | 2015+ |
| Volkswagen | Golf 1.8T (MK7 / MK7.5) | 2015+ |
| Volkswagen | Golf Sportwagen (MK7 / MK7.5) | 2015+ |
| Volkswagen | Golf Alltrack (MK7 / MK7.5) | 2017+ |
HPA branded products carry a one year warranty against manufacturer's defects on all major, non-consumable, components. Damaged caused by incorrect installation, wear and tear, abuse, misuse, racing, collision, foreign particles, etc., will NOT be covered by warranty.
Warranty is offered to original purchaser only and is not transferable.
HPA Motorsports will not be liable for incidental, consequential, indirect, special, or punitive damages of any kind. HPA’s entire liability shall be limited to replacement or repair of the damaged parts at HPA’s option.
Labour and freight costs associated with warranty repair or replacement are NOT covered.
To maintain validity of warranty, factory recommended maintenance schedule and manufacturer’s Technical Service Bulletins (TSB’s) must be adhered to and documented.
In addition to the above, the HPA FT/FTX series Turbo packages for VR6 motors have the following conditions:
Components covered by warranty include:
- Turbochargers
- Exhaust Manifold
- Downpipe
- Catalysts
- Exhaust System
- Intake Manifold
- Silicone Plumbing
- Intercoolers
- Fuel Pump
- Fuel Injectors
- Brake Calipers
- Haldex Controller
Components NOT covered by warranty include:
- Clutch
- Gearbox
- Brake Pads & Brake Rotors
Any claims of defect in workmanship must be repaired at HPA Motorsports' facility located in Langley, Canada. Should the damage be determined to be a direct result of the workmanship of HPA Motorsports, labor costs for HPA Motorsports to complete repairs at our own facility will be included in the warranty repair. In certain circumstances, at the sole discretion of HPA Motorsports, permission may be granted for repairs to be completed at an HPA authorized facility at a pre-approved labor rate.
HPA Motorsports will not be liable for incidental, consequential, indirect, special, or punitive damages of any kind. HPA’s entire liability shall be limited to replacement or repair of the damaged parts at HPA’s option.
To maintain validity of warranty, in addition to the factory recommended maintenance schedule, the following services must be adhered to and documented according to the prescribed schedule:
| Break In period: engine speed is not to exceed 5500 RPM, and absolutely NO standing starts are to be performed | 1000 km / 620 miles |
| Mass Air Flow meter – Clean | 5000 km / 3100 miles |
| Mass Air Flow meter – Replace | 20,000 km / 12,500 miles |
| Engine Oil (Motul Xcess / 8100 5w40) & Filter – Replace | 5000 km / 3100 miles |
| Haldex Fluid & Filter – Replace | 10,000 km / 6000 miles |
Any claims of defect in workmanship must be repaired at HPA Motorsports' facility located in Langley, BC Canada. Should the damage be determined to be a direct result of the workmanship of HPA Motorsports, labor costs for HPA Motorsports to complete repairs at our own facility will be included in the warranty repair.
For remote customers, in certain circumstances, at the sole discretion of HPA Motorsports, permission may be granted for repairs to be completed at an HPA authorized facility at a pre-approved labor rate.
Should you experience any issues with your items, please contact HPA Motorsports for technical assistance using the form below or by calling 604-888-7274 prior to engaging in any repair procedure. Failure to follow the advice of our technical support staff may cause undue harm that will not be covered by warranty.
Developed for the track,
Adapted for the Street...
Developed for the track,
Adapted for the Street...
Adapted for the Street...
HPA FR450 IS38 HYBRID TURBO
The HPA IS38 Hybrid Turbo features a custom compressor and turbine wheel design capable of holding up to 450HP* with a flat torque curve from 3800 RPM to redline! Our turbo is a natural upgrade to IS38, IS20, and even IS12 equipped cars where the OEM units lose breath mid-way in the RPM range. Coupled with a major redesign of the OEM bearing housing, the HPA IS38 Hybrid turbo is the perfect upgrade for those looking for a significant performance boost with improved long-term reliability.
Features
• Supports up to 450HP
• Compressor 52mm/67mm
• Turbine 54mm/51mm
• Unrivaled reliability
• Direct bolt-on replacement with installation kit
• HPA Turbo inlet pipe included
• HPA silicone hose to adapt to factory airbox included
• HPA proprietary mixed-flow turbine wheel
• HPA proprietary CNC machined billet compressor wheel
• Precision CNC machined intake and exhaust housings
• Fully redesigned bearing housing and components
• Option to add Diverter Valve and Calibrated Electronic Wastegate
⭐⭐⭐⭐⭐
At first I was a little skeptical as I was positive the FR450 would not reach 450 WHP. However after getting the car pro tuned by 5150 and running on full Ethanol I was able to reach 420 WHP on a dynojet and any more would really get me into some trouble. The car pulls very hard all the way to 7k and I’m very happy with the purchase, glad I didn’t go bigger!
Kyle G., MK7 Golf R
⭐⭐⭐⭐⭐
Great turbo, works as advertised, holds boost right until redline. Perfect turbo setup for a daily driver; I have not lost much low end from the IS20, and the turbo pulls hard from 3500 right until redline. This is not a turbo that will shatter 60-130 records; to me it is the perfect balance of what is needed for a fast, reliable daily driver.
David K., MK7 GTI
Unrivaled Reliability
The IHI IS series turbos have been known to restrict oil flow under sporty driving conditions which can cause premature failure of the bearings resulting in broken turbine shafts. This can lead to catastrophic engine failures due to oil and debris being pushed out into the exhaust system and igniting. The HPA FR450 IS38 Hybrid is an insurance against these types of failures.
PRECISION ENGINEERED
HPA has spent 4 years of research and development to completely rethink the bearing housing design. Each turbo requires precision CNC machining of the intake and exhaust housings and include an HPA proprietary mixed-flow turbine wheel, and CNC machined billet compressor wheel. All components are completely upgraded to ensure lubrication for both reliability and peace-of-mind.
OEM QUALITY
Each CHRA is built to meet or exceed the OEM quality specifications, with the individual components of the rotating group balanced on a Schenk Balancer. Once fully assembled, each complete CHRA assembly is balanced with a VSR Balancer ensuring a perfect assembly.
DIRECT BOLT-ON REPLACEMENT
The HPA IS38 Hybrid turbo upgrade has everything you will need for a simple and quick installation including turbo inlet pipe, and silicone hose to adapt to the factory airbox. An OEM diverter valve and OEM pre-calibrated wastegate actuator is also available should you require.
Reliable Power
Undeniable Performance
Reliable Power
Undeniable Performance
Undeniable Performance
